Friday, October 3, 2014

Bittersweet

 
Bittersweet
 

What is American Bittersweet Vine?

American bittersweet is a vigorous deciduous, perennial vine that grows 15 to 20 feet tall. It is native to central and eastern North America. They produce yellowish-green flowers that bloom in spring, but the flowers are plain and uninteresting compared to the berries that follow. As the flowers fade, orange-yellow capsules appear.
In late fall and winter, the capsules open at the ends to display the bright red berries inside. The berries remain on the plant well into winter, brightening winter landscapes and attracting birds and other wildlife. The berries are poisonous to humans if eaten, however, so practice caution when planting around homes with small children.




Info from www.gardeningknowhow.com


www.EarlyAmericanHome.net
www.pinterest.com/earamhom1
www.facebook.com/EarlyAmericanHome


Tuesday, May 27, 2014

 
The Garden Cloche


A cloche can loosely be defined as a structure that is placed over a plant to protect it from the cold.  The first mentioning of a cloche can be found around 1630 in a gardening treaty.  John Evelyn (1620-1706) mentioned bell glasses as a mandatory garden tool in his Elysium Britannicum, or The Royal Gardens or Three Books.

While these first cloches were developed by the French and made from glass, the Dutch and English quickly built upon this basic design.  These cultures created cloches that were in lantern and pyramid style. The basic material was the same but the glass panes were held into place with iron frames.
Those who could not afford the expense of glass cloches were not deprived of this important tool.  Cloches made from straw could be found throughout many colonial fields.

Cloches throughout history have been very important in plant protection.  A basic cloche works by absorbing heat during the day and releasing it at night.  This allows the gardener to put their crops out sooner and harvest sooner.  But the story does not end there.  To prevent your plants from getting too hot during the day and cooking, one must vent it in some fashion.  Glass bell cloches need to be removed from the plant before the sun hits it or place bricks around the plant and set the bell cloche on the bricks.  These bricks will create a vent by which excess heat can be released.


Information from:  site.outdora.com


Saturday, March 29, 2014

Colonial Gardening

 
Colonial Gardening
 
 


 Colonial gardens of 17th and 18th century America were as varied as the gardeners themselves and the locations in which they lived. While some gardens followed no plan, others were intricately laid out. Some gardens had plants designated to specific areas, while others were planted in a seemingly haphazard manner mixing tall plants with short ones, flowers with vegetables, and herbs mixed in amongst them all. Garden beds, varying in size and shape according to what was grown in them, were often raised by building up the soil and placing tree saplings on the ground around them. The purpose of raising the beds was to improve drainage, which garnered much attention. Walkways were usually made of tamped soil, gravel, clamshells, or brick, and were just wide enough for one person to walk through and weed the beds. The main walkways were, however, wider because they led to an outbuilding, namely the privy, located at the farthest end of the garden.

 Dutch gardens in New York, as well as those of merchants and townsmen of Virginia, were laid out in symmetrical patterns, yet were simple, functional, and well-balanced. Natural landscaping was seen as something that needed to be tamed and trimmed, not recreated, and resulted in gardens that resembled those of their homelands. Gardens were located near the kitchen house with walkways leading to many of the other outbuildings. The walkways were laid out geometrically in patterns such as basket weave, running bond, and herringbone and designed with either right angles or acute angles. Planting beds were “raised up” by boards allowing for good drainage, ease in planting, tending, and weeding.

 Fences were required by law as early as 1631. Legislation in 1646 set the minimum height of the fence at four and one-half feet and “close down to the bottom”. In 1705, the General Assembly enacted legislation to protect gardens from stray horses, mares, cattle, hogs, sheep, and goats. The fence had to be sturdy enough and so close that “none of the creatures aforesaid can creep through”. Post and rail fences, as well as picket fences, were typical for private gardens. The outlying borders of the fields were generally enclosed with a “worm” or “snake” fence, later known as the “Virginia rail”.

 Early colonists acquired seeds and plants by bringing them from their homelands, or through extensive exchanges across the Atlantic with friends and family. As a result, the majority of fruit trees, vegetables, herbs, and flowering bulbs came from Europe. Some plants such as the tomato and potato, although native to the Americas, came back to the colonies via these exchanges. These plants offered a sense of familiarity in an otherwise unfamiliar territory. Vegetables grown in the kitchen garden would have included leeks, onions, garlic, melons, English gourds, radishes, cabbages, and artichokes. Other vegetables that were needed in larger quantities like corn, beans, and pumpkins, were grown in the larger, outlying fields. Many vegetables and herbs served culinary, as well as, medicinal purposes while flowers were not only edible, but served as dyes and perfumes.

In summary, colonial gardens of the Dutch, merchants, and townsmen were simple, functional, symmetrical, and well-balanced in design while others were simply functional. Common features include raised beds, walkways, and an enclosure in the form of a “nature fence” or a wood fence to keep out stray livestock. Placement of these gardens was generally near the kitchen where they grew an assortment of vegetables, herbs, and flowers.
 
 
 
Taken from Colonial Gardening by Deb Browning

Wednesday, January 15, 2014

 
Tall Case Clocks
 
  Originally, tall case clocks were little more than wall or hang-up clocks. The transition to a tall case clock occurred in England from 1670 to 1700. It is likely that a hood was added to keep dust and dirt from the movement; later a case was added to hide the pendulum and weights. The craft of making tall case clocks in America began in Massachusetts and Pennsylvania and later in Connecticut; Connecticut became the birthplace of mass-produced clocks about 1840. Except in rare instances, the clockmaker did not make the cases for his clocks. Cases were usually made by a cabinetmaker on order from the clockmaker or from the purchaser of the movements. Each area developed its own regional style; one can distinguish between clocks made in Philadelphia, New York, or Boston. Generally speaking, case styles reflected the furniture styles of the period. Cases with flat tops, no feet, and square brass dials are of the William and Mary style. Between 1715 and 1725 arches appeared on the dial and hoods were arched to conform. The ogee foot appeared, and the style developed into that known as Queen Anne. The Chippendale style developed around 1760, broken arches became popular on the hoods and some fretwork was used, brass or wood finials appeared, and ogee feet became standard. (OG -- ogee -- is a molding found in both architecture and furniture.) Around 1780, the Hepple- white style appeared. The cases of this period often feature inlay work. Dials of tall case clocks are another way to date clocks. The earliest ones (1600 to about 1740) were about 10" square and made of brass with spandrels of pierced brass; usually a silvered chapter ring contained the numbers. With the advent of the arched dial, a moon phase often appeared in the lunette, which had carried the clockmaker's name. The painted dial appeared around 1780 along with Arabic numerals. Movements of tall case clocks were most often made of brass and ran for eight days. Some brass movements were of the pull-up variety, however, and ran for 30 hours.  Excerpt taken from:  A Brief History of American Clockmaking by Mo Klein  www.EarlyAmericanHome.netwww.EarlyAmericanHome.blogspot.com